Uncategorized

Gfive GPower 1 Firmware/Flash File Stock ROM

How To Flash MTK Gfive GPower 1:

  • Read The Instruction Carefully.
  • Battery Should Be Charged Up to 80%.
  • Note: Backup Before Update
  • Install USB Drivers  And Sp Flash Tool.
  • Download And Extract Firmware For Your Phone .
  • After Extracting You Will Find The Firmware.
  • Open SP Flash Tool And Select The Scatter File From Firmware.
  • Now press download button.
  • if face any error change download mode to firmware upgrade
  • when Green bar of OK appears your flashing done.
  • Note: Don’t Forget To Backup.
  • This File Can Be Flash With Miracle BOX.

How To Flash SPD Gfive GPower 1:

  • Note: Backup Before Update
  • Battery Should Be Charged Up to 80%.
  • This tool allows you to flash PAC on SPD devices QMobile CS1.
  • If you want to flash any SPD device with this tool, follow the procedures below.
  • Download and install SPD drivers.
  • Download and extract SPD Upgrade Tool or Research Download.
  • Inside the extracted file launch Upgrade Download or Research Download
  • Click load packet icon.
  • Select the .PAC file of the spreadtrum device you want to flash or upgrade.
  • Click on settings icon
  • Uncheck all box in calibration tab.
  • Tick erase all flash in flash operation tab (optional).
  • Close settings.
  • Click play or Download button.
  • Hold volume down button & connect the device to the computer.
  • When the blue progress bar is seen, release the volume button.
  • Process is complete when the word PASSED in green colour is seen.

Gfive GPower 1 OTA Update:

Note: Make sure you have backed up all your videos,pic and Apps etc.

Download the .zip and extract it on your Desktop. Copy the dload folder to your SD card’s root Folder.

Insert the memory card.

Turn off your phone  .

Battery Should Be Charged Upto 80%.

Press both Volume keys (VOL UP and DOWN) and then the power key until the software upgrade progress bar displays. Then you can release all keys.

Wait until the upgrade progress bar finishes and the phone restart.

Check firmware version in Settings > About phone / build number.

How to use QcomDloader Tool

Related Posts:

 

About the author

allrom

Leave a Comment