Samsung

GALAXY S Ⅱ Plus GT-I9105P CHN China Firmware

GALAXY S Ⅱ Plus GT-I9105P CHN Review:

The Samsung Galaxy S II Plus is a single SIM (GSM) smartphone that accepts a Regular-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, Infrared, FM and 3G. Sensors on the phone include Accelerometer, Ambient light sensor and Gyroscope.

Samsung Galaxy S II Plus smartphone was launched in February 2013. The phone comes with a 4.30-inch touchscreen display with a resolution of 480 pixels by 800 pixels at a PPI of 217 pixels per inch. Samsung Galaxy S II Plus price in India starts from Rs. 5,499.

The Samsung Galaxy S II Plus runs Android 4.1 and is powered by a 1650mAh removable battery. It measures 125.30 x 66.10 x 8.49 (height x width x thickness) and weigh 125.30 grams.

The Samsung Galaxy S II Plus is powered by 1.2GHz dual-core processor and it comes with 1GB of RAM. The phone packs 8GB of internal storage that can be expanded up to 64GB via a microSD card. As far as the cameras are concerned, the Samsung Galaxy S II Plus packs a 8-megapixel primary camera on the rear and a 2-megapixel front shooter for selfies.

How To Flash Samsung :

  • Download Firmware For your Device It Should Be compatible
  • Now Power Off The Phone.Download And Install USB Driver For Your Samsung Galaxy J7+ SM-C710F To Your Device.
  • Download Flash Tool Odin To Flash Your Samsung Phone.
  • If You Have Not Installed Already.
  • Press and hold “Home + Power + Volume down” buttons for a
  • few seconds To Get Your Phone into Download Mode.
  • When your device is in download mode, connect it to the PC
  • with a USB cable.
  • Odin window on PC should detect the phone and show an
  • “Added!!” message.
  • Now extract the .zip firmware file you downloaded to get the
  • Odin .tar file.
  • Skip this step if you already have a firmware .tar file.
  • Click the AP tab in the Odin window and select the .tar.md5
  • FIRMWARE file you downloaded.
  • Note: DO NOT PLAY with any other options on the screen.
  • Just connect your Samsung device and select the FIRMWARE
  • file in the PA tab.
  • Click the Start button on Odin and wait for the process to
  • finish.
  • Once you have finished successfully, you will see a message on
  • the Odin screen.
  • The phone will restart automatically when Odin is blinking.
  • You can then disconnect your device.
  • That is all. Hope Your Problem Solved.

 

Related Posts:

 

About the author

allrom

Leave a Comment