Galaxy J1 mini SM-J105M Firmware/Flash File Stock ROM

Galaxy J1 mini SM-J105M Firmware/Flash File Stock ROM

About Galaxy J1 mini SM-J105M:

The Samsung Galaxy J1 mini runs Android and is powered by a 1500mAh removable battery. It measures 121.60 x 63.10 x 10.80 (height x width x thickness) and weigh 120.00 grams.

The Samsung Galaxy J1 mini is powered by 1.2GHz quad-core processor and it comes with 768MB of RAM. The phone packs 8GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Samsung Galaxy J1 mini packs a 5-megapixel primary camera on the rear and a 0.3-megapixel front shooter for selfies.

The Samsung Galaxy J1 mini is a dual SIM (GSM and GSM) smartphone that accepts Micro-SIM and Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM and 3G. Sensors on the phone include Compass Magnetometer, Proximity sensor, Accelerometer and Gyroscope.

Samsung Galaxy J1 mini smartphone was launched in March 2016. The phone comes with a 4.00-inch touchscreen display with a resolution of 480 pixels by 800 pixels.

How To Flash Galaxy J1 mini SM-J105M:

  • Download Firmware For your Device It Should Be compatible
  • Now Power Off The Phone.Download And Install USB Driver For Your Samsung SM-J105M  To Your Device.
  • Download Flash Tool Odin To Flash Your Samsung Phone.
  • If You Have Not Installed Already.
  • Press and hold “Home + Power + Volume down” buttons for a
  • few seconds To Get Your Phone into Download Mode.
  • When your device is in download mode, connect it to the PC
  • with a USB cable.
  • Odin window on PC should detect the phone and show an
  • “Added!!” message.
  • Now extract the .zip firmware file you downloaded to get the
  • Odin .tar file.
  • Skip this step if you already have a firmware .tar file.
  • Click the AP tab in the Odin window and select the .tar.md5
  • FIRMWARE file you downloaded.
  • Note: DO NOT PLAY with any other options on the screen.
  • Just connect your Samsung device and select the FIRMWARE
  • file in the PA tab.
  • Click the Start button on Odin and wait for the process to
  • finish.
  • Once you have finished successfully, you will see a message on
  • the Odin screen.
  • The phone will restart automatically when Odin is blinking.
  • You can then disconnect your device.
  • That is all. Hope Your Problem Solved.


Related Posts:


 SM-J105M Firmware


About the author


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.